Stage III Concepts Analord Prime
From AUD $5,200.00
Extreme Resolution Silver/Palladium Phono Cables
The Stage III Concepts Analord Prime tonearm cables are designed exclusively to handle low level analog signals such as the micro-volt outputs of MM/MC cartridges. The extremely slight and fragile properties of these types of signals are often not transmitted adequately and can easily be distorted by standard line-level interconnects. Carefully designed conductor, dielectric and geometry parameters are essential in protecting delicate signal integrity; preserving and accurately conveying all the musical information retrieved by today’s analytical and revealing phono cartridges. AeroStrand conductors are better suited for this application.
Analord Prime series tonearm cables are literally an extension of your tonearm’s headshell leads; the AeroStrand conductors become one with those of your tonearm all the way through to your phono preamp. This, in conjunction with our advanced shielding technology, results in micro-dynamics, transparency and silence like you’ve never heard. Analord Prime cables provide all the additional performance benefits of the A.S.P. Reference line, thanks to the use of AeroStrand Ultra conductors, 4 layer shielding with H.D.A foil, and a granulated shielding/damping layer.
A 1m Analord Prime phono cable with RCA connectors is $5,200.
Cable prices depend on the lengths required.
Please contact us to discuss your specific requirements.
|Conductors||4 x Cryo-treated, Silver/Palladium AeroStand Ultra Conductors|
|Configuration||Quad helix geometry|
|Air Tubes||Air dielectric with FEP Teflon air-tubes.|
|Outer Shield||Floating, 4 level shield; composed of H.D.A. Foil, two full coverage silver braids and an individual silver braid for each conductor. Granulated silica / ceramic / ferrite mechanical damping / shielding layer. Custom carbon fibre cable housing.|
|Connectors||WBT Nexgen silver RCA plugs. Available RCA/RCA or RCA/5-pin DIN as standard terminations. Independent, fully shielded ground wire terminated with gold plated copper mini-spades. Alternate grounding configuration possible with additional independent ground wire connected to braided shield.|